MyVent
Ventilation
Full-recovery power saving
If both cooling and heating are required, you don’t have to set configurations separately for cooling and heating. The waste heat produced during cooling can be recovered and used in production of hot water, which then will be used on the system’s demand. The total efficiency ratio (TER) can be up to 7.78, which means reduction of upfront investments and subsequent operating costs.
70 kW
Rated heating capacity, heating only66 kW
Rated cooling capacity, cooling only
Automatic cooling and heating balancing
Thanks to its modular design along with self-adaptive cooling and heating balancing technologies, the unit is able to automatically adjust the output cooling and heating capacity based on the actual conditions, quickly switch between the operating modes, and adjust the outlet water temperature so as to ensure continuous balancing that allows providing capacity on demand. In this way, temperature and humidity are controlled more precisely for even more comfort.
Operation limits
The unit employs renowned multi-speed fans, that further reduce the operating noise level and enable intelligent adjustment of air flow rate so as to maintain stable cooling and heating in a wide temperature range between -15 °C and +48 °C.
| Specifications | Units | MCU066YHF |
| Rated cooling capacity, cooling only | kW | 66 |
|
Rated input power, cooling EER |
kW W/W |
20 3,3 |
| Water flow rate | m3/h | 11,4 |
| Rated heating capacity, heating only | kW | 70 |
|
Rated input power, heating COP |
kW W/W |
20 3,3 |
| Water flow rate | m3/h | 13,9 |
| Rated cooling capacity, cooling and heating | kW | 63 |
| Rated heating capacity | kW | 81 |
|
Rated total capacity TER |
kW W/W |
18,5 7,8 |
| Rated water flow rate, cold water side | m3/h | 11,4 |
| Rated water flow rate, hot water side | m3/h | 13,9 |
| Power supply | 380-415 V, 3 phases, 50 Hz | |
| Water pressure drop, cold water side | kPa | 40 |
| Water pressure drop, hot water side | kPa | 60 |
| Inlet/outlet water pipe diameter, cold water side | DN 65 (flange connection) | |
| Inlet/outlet water pipe diameter, hot water side | DN 65 (female thread) | |
| Fan type | Low-noise axial fan | |
| Number of fans | pcs | 2 |
| Air flow rate | m3/h | 26000 |
| Compressor type | Hermetic scroll compressor | |
| Number of compressors | pcs. | 1 |
| Operation mode | Automatic microcomputer-controlled operation | |
| Refrigerant type | R410A | |
| Unit weight | kg | 650 |
| Operating weight | kg | 710 |
| Dimensions (L x W x H) | mm | 2200 × 860 × 1980 |
Notes:
1. Cooling capacity and electric power consumption during cooling operation refer to the rated water flow rate, outlet water temperature 7 °C and ambient air temperature 35 °C.
2. Heating capacity and electric power consumption during heating operation refer to the rated water flow rate, outlet water temperature 45 °C and ambient air temperature 7 °CDB.
3. Cooling + heating mode: capacity and power consumption parameters refer to the rated water flow rate, outlet temperature +7 °C for cooling and +45 °C for heating.
Related products
Mycond references
